Product Center
BaodingFirst LF-33 Extrusion-Specific Dispersant
Phone: 0750-6680778
Product Description
Pain point you may have experienced
Your extruder line runs hot. The compound feels stiff, the surface of the profile comes out rough or wavy, and die swell is so unpredictable that you have to scrap one out of every ten meters. When you try to speed up the line, the compound scorches before it even reaches the die. You have tried different processing aids, but they either slow down cure or leave oily residues.
Why LF‑33 is different
First® LF‑33 is a high‑performance flow dispersant specifically designed for internal mixer and extruder processes. It works exceptionally well with EPDM, but is also highly effective in NR, SBR, BR, NBR, and other general rubbers. Instead of just lubricating, LF‑33 actively reduces the Mooney viscosity of the compound – the rubber flows easier, the internal mixer runs cooler, and the risk of premature scorch drops significantly.
What you gain on the extrusion line
Lower processing temperature – you can run the extruder faster without scorching.
Reduced die swell – profiles hold their shape, so you cut less scrap.
Smoother surface finish – no more sharkskin, wavy patterns, or rough edges.
Higher output – injection and extrusion cycles become shorter, raising throughput.
Fewer defects, lower scrap rate – less rework, more good parts per shift.
No trade‑off on cure or properties
Unlike some processing aids that delay vulcanization or soften the compound too much, LF‑33 does not affect curing speed nor harm the final physical properties – tensile strength, tear resistance, and compression set remain intact. It simply makes the compound easier to process, from mixer to extruder to press.
Real‑world result
An EPDM weatherstrip producer was struggling with high scrap due to surface roughness and die swell. After adding First® LF‑33 at 2 phr, their extrusion line speed increased by 18%, the reject rate dropped from 5% to 1.5%, and the surface passed the OEM’s visual inspection without secondary finishing. They also noticed that the mixer cycle was shorter, saving about 12 kWh per batch.
Typical specifications
Appearance: white to off‑white granules
Chemical composition: saturated fatty acid,fatty acid soap salt and fatty acid amide
Melting point: approx. 65-75°C
Recommended dosage: 1–3 phr (optimise for your recipe)
Packaging: 25 kg carton with inner PE liner
Storage: 12 months in unopened packaging, cool and dry
Would you like a sample to run on your own line? Just let us know. No rush — purely for your evaluation
Contact Us
Nationwide Unified Service Hotline
http://www.rubberaccelerator.net/
Guozhou Industrial Park, Zhongtang Town, Dongguan, Guangdong, China
Scan to recognize and follow
Scan the code to follow and inquire
Powered by www.300.cn | SEO tags | Privacy Policy